KINGSTON Memory KF564C32RSAK2-32 FURY RENEGADE RGB DDR5, 6400MT/s, 32GB KIT

Kingston FURY Renegade RGB DDR5 (Part Number: KF564C32RSAK2-32) is a memory kit 32GB (2x16GB) for DDR5 desktop platforms. Supports Intel XMP 3.0 for easy profile setup, while RGB lighting can be synchronized via compatible software.

Why choose it?

• Ideal upgrade for gaming/content creation when you want 32GB total memory.
• 2 DIMM Kit for dual channel operation on compatible motherboards.
• XMP profile for quick activation of nominal settings (where supported).

Technical specifications (official)

• Capacity: 32GB (2x16GB)
• Speed / Timings (XMP #1): DDR5-6400, CL32-39-39 @ 1.4V
• Type: DDR5 UDIMM 288-pin, Unbuffered, Non‑ECC
• Organization: 1Rx8
• Default (JEDEC): DDR5-4800 CL40-39-39 @ 1.1V

Compatibility & useful instructions

Useful tip: If you are building a new system, first select a CPU/motherboard and check the motherboard manufacturer's compatibility list (QVL) for DDR5 memory. At very high speeds, stability may be affected by BIOS/UEFI and memory controller architecture.

For the best chance of achieving the XMP profile, it is recommended to update BIOS/UEFI to the latest available version and install DIMMs in the recommended motherboard slots (usually A2/B2). If you add two more DIMMs later, it is common to need more conservative settings.

• DDR5 motherboard required. DDR5 does not fit in DDR4 slots.
• To succeed 6400MT/s, activate Intel XMP 3.0 in BIOS/UEFI. Final stability depends on CPU/motherboard/BIOS.
• If XMP is not enabled, the memory will operate at JEDEC default settings as defined by the platform.

What to look out for before buying

Since very high DDR5 speeds are CPU/motherboard/BIOS dependent, it is recommended to check the motherboard manufacturer's compatibility list (QVL) and have an updated BIOS/UEFI. If you plan to populate all 4 DIMM slots later, it is common to need more conservative settings for maximum stability.

If you are interested in lighting, check that the case/CPU cooler allows sufficient space and that you have synchronization software available (Kingston FURY CTRL and/or motherboard software, depending on compatibility).

Official sources

• Kingston Parts Search (KF564C32RSAK2-32)
• Manual/Spec sheet (PDF)
• Kingston Official Warranty Statement
• Kingston FURY CTRL (software RGB)

Frequently Asked Questions (FAQ)

Is it suitable for a laptop?;

No. The KF564C32RSAK2-32 is a 288-pin DDR5 UDIMM for desktop. For laptops you need a DDR5 SODIMM (if supported by your system).

Do I need a DDR5 motherboard?;

Yes. DDR5 memory is not compatible with DDR4 motherboards. Make sure your motherboard has DDR5 DIMM slots.

How will it work at 6400MT/s?;

Nominal speed requires enabling Intel XMP 3.0 profile in BIOS/UEFI and CPU/motherboard compatibility. If XMP is not enabled (or is not stable), it will operate at JEDEC default settings, depending on the motherboard.

Is it ECC or Registered?;

No. According to the official Kingston Parts Search / Spec Sheet it is Non-ECC and Unbuffered (UDIMM). It has On-Die ECC (internal correction) which does not replace system ECC.

Can I use a module from the kit?;

Technically it can also work with a single DIMM, but for optimal performance (dual channel) and to avoid warranty/return issues, it is recommended to use/return as a complete kit (2 pieces).

How do I adjust/synchronize the RGB lighting?;

Lighting can be adjusted with Kingston FURY CTRL and/or motherboard RGB software (depending on compatibility). For instructions and supported platforms, see the official Kingston FURY CTRL page.